14.03.2019
Dairesel Elmas Testerelerde Kullanım Önerileri - Recommendations For Diamond Circular Blades
Farklı Malzemeler İçin Kesme Performansı ( cm2 / dakika )
Cutting Performance ( cm2 / min. ) For Different Materials
Malzeme/ Meterial |
YavaÅŸ / Min. Power |
Hızlı / Max. Power |
Çok Hızlı / High Power |
Yüksek Quartz İçerikli Granit
High Quartz Content Granite |
100 / 150 |
200 / 300 |
- |
DüÅŸük Quartz İçerikli Granit
Low Quartz Content Granite |
300 / 400 |
400 / 600 |
- |
Mermer - Marble Ø200 - 700 |
600 / 750 |
1000 / 1500 |
- |
Mermer - Marble Ø700 - 1300 |
800 / 900 |
1500 / 2500 |
4000 / 6000 |
Mermer - Marble Ø1300 - 2000 |
1000 / 1200 |
1500 / 2500 |
- |
Traverten - Travertine |
1000 |
2000 / 3000 |
5000 / 6000 |
Kum taşı - Sand Stone |
300 / 1000 |
600 / 2000 |
- |
- Dairesel Elmas Testere makinaya takılmadan önce; mil, flanÅŸlar ve makinanın genel kontrolleri titizlikle yapılmalıdır.
Before mounting the circular blade to the machine; the spindels, flange and the condition of the machine should be very carefully checked.
- Dairesel Elmas Testere göbek çapı ve takılacak ana motor mil çapı çalışma toleranslarında olmalıdır ( +0.05mm ).
Circular Saw core diameter and main motor shaft diameter to be installed must be within working tolerances ( +0.05mm ) .
- Dairesel Elmas Testere sökülüp takıldıktan sonra, herzaman aynı pozisyonda tekrar yerine takılmalıdır.
Circular saw must always be reinserted in the same position after it has been removed and reinstalled.
- Dairesel Elmas Testere dönüÅŸ yönüne dikkat edilmeli ve herzaman aynı yöne takılmalıdır.
Circular saw direction of rotation should be observed and always in the same direction.